Quy trình sử dụng máy phát điện

Process Use Generator

1. Safe use of generators?

The power outage may cause some concern about safety, especially when people find ways of heating by the alternative sources of energy.
A single transmitter can be an effective source of power during power outages, but you have to pay attention to use safely. Always read the user manual .

• Do not use the portable generator in the garage, the garage, the basement, the floor or in a closed or partially closed, even when there is ventilation. Open Windows or use exhaust fans also can not prevent CO buildup in the home.


May Phat Dien Cong Nghiep

Remember: you can't smell Carbon Monoxide.
• Using the machine improperly could result in CO poisoning caused by toxic emissions of engines, shock or fire.

• Insert the CO alarm in the home run by batteries or battery backup regularly check the battery and replace the battery when needed.

• If you feel discomfort, dizziness or fatigue when using a transient place, right to breath-don't delay.

Use the outdoor transmitter
• Put the machine away from Windows, doors, ventilation pipes-the place can get into the CO.

• To avoid electric shock, keep the air too dry and do not use in the rain or moisture. Operate the machine on a flat surface in dry under a canopy breathable. Make sure your hands are dry before touching the generator.

Used fuel storage & for machine safety
• turn off the machine before refueling. The petrol poured into the engine's heat can ignite.

• If you spill fuel, or not close for careful, gasoline vapors will spread along the ground and ignited by sparks emitted from a device or from switches in the device.

• Use only the type of fuel recommended for use according to operating instructions generator or be indicated on the label, the.

Not for the generator to work overload
• Locate the power you will need. Power consumption is calculated according to the number of Watts on bulbs. Labels on the equipment and said the power needed. If unable to determine the amount of power you will need, ask an electrician.

• Ensure your machine produces power greater than the power consumed by the equipment you connect to the computer, including the increase of the voltage at the start when you switch on the machine. If air does not produce enough power to operate all the equipment at once, use the alternating each device.

• If the device power consumption is more than power plants can produce, the fuse may blow, or worse, the devices connected to the machine can damage.

2. Select power players.

Lựa chọn đúng đắn công suất là công việc quan trọng để quyết định trang bị máy phát cho quý khách hàng. Những vấn đề phát sinh trong quá trình chọn lựa thường như sau:

• Nếu chọn công suất quá thấp sẽ dẫn đến máy phát không đủ công suất cần thiết, bị quá tải, giảm tuổi thọ trầm trọng.

• Nếu chọn công suất quá cao sẽ dẫn đến đầu tư vốn cao không cần thiết, máy chạy thường xuyên non tải cũng làm tăng tiêu hao nhiêu liệu và giảm tuổi thọ.
Chúng tôi xin có một vài hướng dẫn nhỏ để các bạn có thể tìm hiểu và lựa chọn công suất máy cho phù hợp.

1. Lập bảng tính công suất biểu kiến kVA
Điện áp 220/380V, tần số 50 Hz

Thứ tự Loại tải và công suất (kW)
khởi động Hệ số công suất
cos φ Kiểu khởi động Hệ số dòng khởi động Dòng điện danh nghĩa (A) Tổng dòng điện danh nghĩa (A) Dòng khởi động (A) Tổng dòng khởi động (A)
(1) (2) (3) (4) (5) (6) (7) (8) (9)
1 Mô tơ 10kW 0.8 trực tiếp 7 19 19 133 133
2 Mô tơ 50kW 0.8sao/tamgiác3.5 95 114 332 351
3 Đèn 20kW 0.4 trực tiếp 1.5 76 190 114 228
4 Điện trở 15kW 1.0 trực tiếp 1.2 23 43 28 218
…. …. …. …. …. …. …. …. ….
6 Khác 30kW 0.8 trực tiếp 1.5 57 270 86 299
In that:
• Dòng điện danh nghĩa (6) = công suất (2) x 1000/ cosphi (3) x 3 x 220
• Dòng điện khởi động (8) = dòng điện danh nghĩa(6) x hệ số khởi động (4)
Theo bảng tính ta có:
• Tổng dòng điện danh nghĩa lớn nhất là: 270A
• Tổng dòng điện khởi động lớn nhất là: 351A
• Vậy công suất biểu kiến theo dòng điện lớn nhất là: 351 x 3 x 220 / 1000 = 231kVA
Note:
• Thứ tự đóng tải các mô tả công suất lớn có ý nghĩa quan trọng trong việc lựa chọn công suất biểu kiến kVA
• Xét về mặt lợi ích cho máy phát thì nên đóng các mô tơ có công suất lớn trước, nhỏ sau.
2. Lập bảng tính công suất thực kW
Watch auto load capacity (kW) number systems used during the day (%) The average capacity in August (kW) power consumption during the day (kWh)
(1) (2) (3) (4) (5) (6)
1 Motor 10 80 8 192
2 Motor 50 60 30 720
3 Lamps 20 100 20 480
4 Resistance 15 80 12 288
…. …. …. …. …. ….
6 Other 30 40 12 288

If there is no data on parameters, calculate the average capacity in August from the figures the power consumption during the day.According to the spreadsheet I have:
• Real capacity, total: 125 kW
• The real capacity of an average day: 82 kW
• The largest flowering capacity: 82/0.6 = 136 kW
• is the real capacity (or total if this value is less than the).